This Factory Five Racing Mk2 Roadster was acquired by the seller in 2021 as an unfinished project and was subsequently completed in 2024. Power comes from a 347ci stroker V8 paired with a Tremec five-speed manual transmission, and the car is finished in Velvet Venom Red. It rides on a four-wheel independent suspension system with adjustable coilovers as well as 17″ Halibrand-style wheels and is further equipped with disc brakes, a Flaming River steering rack, a single roll hoop, and side-exit exhaust pipes. Inside, the seats are trimmed in tan leather and are joined by Simpson racing harnesses, a wood-rimmed steering wheel, and Smiths instrumentation. This Mk2 Roadster is now offered in Minnesota with an assembly manual, build photos, partial build records, and a North Dakota title in the seller’s name describing the vehicle as a 2024 Assembled Vehicle Coupe Kit Car.
The fiberglass body was painted Velvet Venom Red by Hillsboro Body Shop in North Dakota under current ownership. Details include a gold-finished single roll hoop, a hood scoop, wind wings, front bumperettes, a tubular rear bumper, a LeMans-style fuel filler cap, and side-exit exhaust pipes.
The 17″ Halibrand-style wheels are wrapped in BFGoodrich Comp T/A tires. The car rides on a four-wheel independent suspension system with adjustable coilovers and is equipped with Flaming River rack-and-pinion steering, as well as four-wheel disc brakes.
The cockpit features low-back bucket seats upholstered in tan leather, and color-matching material extends to the dashboard. Simpson four-point harnesses are provided for each occupant, and appointments include a dash-mounted rearview mirror, a battery safety cut-off switch, and a trunk-mounted battery.
The wood-rimmed steering wheel fronts Smiths instrumentation consisting of a reverse-sweep 180-mph speedometer, an 8k-rpm tachometer, and auxiliary gauges for coolant temperature, fuel level, oil temperature, and oil pressure, along with a Lucas ammeter. The five-digit odometer shows 1,800 miles.
The 347ci stroker V8 is equipped with a Holley SysteMAX intake manifold and is said to have been built by Quality Engine Builders of Fargo, North Dakota. Work is noted to have involved installing a Scat crankshaft, Wiseco pistons, a high-duration camshaft, aluminum cylinder heads, Blue Thunder pushrods, roller rockers, and polished Cobra-branded valve covers.
Power is delivered to the rear wheels through a Tremec five-speed manual transmission and a custom driveshaft.
Photos taken during various stages of the build can be viewed in the gallery below.
The vehicle is titled in North Dakota as a 2024 Assembled Vehicle Coupe Kit Car using the sequence listed above.