This single-axle overland travel trailer was built by the current owner and is equipped with a slide-out kitchenette, a Rough Country pop-up rooftop sleeping area, a 92″×62″ mattress, and a patio awning. A removable solar panel setup is included, and other house equipment includes a shore power connection, a sine inverter, a DC-DC vehicle charger, a 10-gallon water tank, an 80-watt water pump, and a 20-lb propane tank. The slide-out kitchenette houses a Blackstone griddle, a two-burner stove, and a sink. The trailer was assembled using a BrandFX fiberglass body that is finished in orange bedliner material and mounted to a modified Chevrolet C-10 pickup chassis. Other details include stabilizer jacks, a Demco EZ-Latch coupler, an Ultimate Trailer A-frame jack, and 17″ wheels sourced from a Jeep JK-series Wrangler. This custom overlanding trailer is now offered on dealer consignment at no reserve with a build summary and a clean Wyoming title.
The NAPA 8’×8′ curb-side patio awning features LED strip lighting and extends over the slide-out kitchenette, which is outfitted with a Blackstone griddle, a two-burner gas stove, a collapsible sink, a flexible faucet, a storage box, and a silverware drawer. A Jensen Bluetooth head unit is mounted above the kitchenette slide and is connected to a pair of 8″ coaxial speakers.
Electrical systems include a Renogy DC-DC vehicle charger, 15-amp 110v shore power connections, a removable 100-watt solar panel and an MPPT solar charge controller, a 150 amp-hour lithium iron phosphate battery, and a 2kW 110V full sine inverter. The trailer is also outfitted with rear and side storage compartments, exterior flood lamps, and bubble level indicators. The rear storage compartment includes a 12-volt power outlet.
Finished in orange bedliner material, the BrandFX fiberglass body is mounted to a modified Chevrolet C-10 pickup chassis. Five-spoke 17″ wheels were sourced from a JK-series Jeep Wrangler and are mounted to the single axle using wide-track adapters. The wheels are wrapped in 255/75 Hankook tires, and the trailer rides on Monroe 58567 shocks with overload springs. An anti-sway bar is also equipped, and the tongue of the trailer houses a storage box and an Ultimate Trailer jack. The Demco EZ-Latch coupler fits a 2″ ball hitch, and owner-provided measurements show the trailer to be 12′ long and 6′ 6″ wide with a 40″ box height with the tent stowed.
A Rough Country pop-up tent is mounted atop the trailer and features ripstop fabric sides and top. A 92″×62″ mattress is located inside, and a pair of self-inflating mattresses are included. Additional house equipment includes the following:
- 10-gallon water tank
- Gravity and hose fill services
- 60-watt water pump
- Quick-connect slide-out water connection
- 20lb propane tank
Twin Ark 30″ drop-down stabilizer jacks are supplemented by a pair of slide-out stabilizer jacks. Additional underbody photos are provided in the gallery below.
The current Wyoming title describes the trailer as a 2024 model year and lists the make and body style as “HMDE” and “HSE,” respectively. It is titled by the VIN “S74434W” and the stamping on the trailer’s tongue is shown above.